Certifications
ISO 9001:2008
ISO/TS 16949:2009
ISO 14001:2004
OHSAS 18001:2007
REACH COMPLIANT
ELV COMPLIANT
Certifications
ISO 9001:2008
ISO/TS 16949:2009
ISO 14001:2004
OHSAS 18001:2007
REACH COMPLIANT
ELV COMPLIANT
 
 

Turned Cage Needle Roller Bearing
26 October 2018

Roller bearings are the earliest known type of rolling-element-bearing, dating back to at least 40 BC. Common roller bearings use cylinders of slightly greater length than diameter. Roller bearings typically have higher radial load capacity than ball bearings, but a lower capacity and higher friction under axial loads.
Read More

Needle Roller Bearings – What Are They?
11 October 2018

A needle roller bearing is a bearing that uses small cylindrical rollers. These rollers are used to reduce friction of a rotating surface. Compared with ball bearings, needle roller bearings have a large surface area that is in contact with the bearing raceway journals.
Read More

Use of Bearings in the Automobile Industry
28 september 2018

All moving parts of automobiles require bearings to function. Bearings enhance the performance of the vehicles, bear heavy loads, and reduce friction. Some major sub-systems where bearings are used are engines, gearboxes, transmissions, wheels, steering, electrical motors, pumps etc.
Read More

Drawn Cup Needle Roller Bearings
17 september 2018

NRB offers a precision engineered range of drawn cup needle roller bearings to various clients. These are a kind of roller bearings with cylindrical rollers that are long and thin in relation to their diameter.
Read More

Rocker Arm Bearings
23 August 2018

Rocker arms were first invented in the 19th century and have changed little in function since then. Improvements have been made, however, in both efficiencies of operation and construction materials
Read More

Crankpin Bearing
03 August 2018

A crankpin or crank journal is a journal in an engine or mechanical device. That is, the part of a shaft or axle that rests on bearings
Read More

Cylindrical Roller Bearing
19 July 2018

Cylindrical roller bearings are bearings in which cylinders are used as the rolling components as opposed to balls in ball bearings. Because of this, the rollers have a greater (linear)...
Read More

Tapered Roller Bearings
2 July 2018

Tapered roller bearings are rolling component bearings that can support axial forces as well as radial forces. A Key feature of Tapered Roller Bearing is ability to handle high combined axial and radial loads...
Read More

Needle Roller Bearings
16 June 2018

Needle roller bearings have relatively small diameter cylindrical rolling elements whose length is much larger than their diameter. Compared with other types of rolling bearings, needle roller...
Read More

Full Complement Needle Bearings
04 June 2018

Full complement needle bearings have a through a hardened outer ring which results in high static and dynamic load capacities and an ability to withstand overloading, shocks, and vibration.
Read More

Ball Bearings
25 May 2018

A ball bearing is a rolling element that uses balls to maintain the separation between the bearing races. Ball bearings support rotary parts and reduce friction to facilitate the smooth operation of machines.
Read More